Compression Plumbing Angle Valve

Parameters of Compression Plumbing Angle Valve

When an angle valve is used as a shut-off valve for residential plumbing fixtures, it is called an angle stop valve, or simply an angle stop.

Additional information

Finising:

Sand blasted

Materials:

Brass, Bronze, Lead-free brass

Size:

1/2"-2"

Temperature:

-10˚C-120˚C

Thread connection

BSP, NPT

Cartridge:

Brass

Handle:

Iron

Life time:

300000 times On-Off

Details about Compression Plumbing Angle Valve

Compression Plumbing Angle Valve

JX-0203

Stop & Waste Valves, Washing Machine Valves, Water Heater Service Valves, Kitchen Gas Shut-Off Valves, Globe Valves
OEM, ODM, OBM
Power: Manual
Media: Water
Port Size:20mm- 50mm
Structure: Angle
Product name: Stop Angle Valve
Material: Brass Body
Connection: FemaleXMale Thread

Plumbing Angle Valve Basics

Plumbing angle valves are an important part of every plumbing system. Used in various applications like sinks, toilets, and showers, it is essential to understand the basics behind these valves. The simplest form of an angle valve is a compression plumbing angle valve and consists of a body, handle, bonnet nut, and seat washer.

Compression plumbing angle valves are typically constructed from brass or chrome-plated brass for durability and performance. The body includes two ports that control the flow of water through the valve – one inlet port to deliver water from the main line into the fixture and one outlet port to carry used water away from the fixture. A durable handle connects directly to a stem connected to the valve’s interior mechanics, enabling you to open and close the valve quickly.

Working Mechanism

Compression plumbing angle valves are an essential part of modern plumbing systems. Working with water pressure, these valves regulate water flow and allow precise adjustment to suit various individual needs. Understanding their primary working mechanism is essential for ensuring efficient operation and avoiding potential issues.

In a compression plumbing angle valve, a rubber seal is held by the stem at the center of the valve body. When opened, the stem pushes away from its seat, allowing water to pass through it. A nut on top of the valve body controls the force of this movement. By turning it clockwise, you can increase compression, which tightens the seal against its seat and reduces the flow rate; conversely, turning it counter-clockwise decreases compression and increases the flow rate.

Installation Process

Installing a compression plumbing angle valve can be difficult for those with little to no experience in home improvement projects. However, with the proper steps and knowledge, the installation process can be done quickly and efficiently. Before beginning this project, it is essential to have all the necessary tools, such as an adjustable wrench, plumber’s tape, and a Teflon paste. Additionally, some additional supplies may be needed depending on the type of angle valve being installed.

When tackling this project, the first step will generally involve disconnecting any existing supply lines and drain pipes currently connected to the area where the new angle valve will be placed. Once these have been removed from their current locations, they should be attached to either side of the new angle valve before being secured using the plumber’s tape and Teflon paste.

Potential Issues with Angle Valves

Angle valves, also known as compression plumbing angle valves, are a type of valve used to control liquid flow within pipes. While they are often the go-to choice for many plumbers and homeowners alike, some potential issues can arise with their use.

The biggest issue to be aware of is the possibility of leaking. Angle valves have several parts that must be tightly secured to remain effective; if these parts become loose over time, it could lead to leaks which could cause extensive damage and costly repairs. To avoid this issue, the angle valve must be properly installed and regularly checked for signs of wear or damage.

Another potential problem is corrosion due to exposure to water and other liquids over time.

Conclusion: Best Choice for Compression Plumbing

The Compression Plumbing Angle Valve is the best for compression plumbing and is a PEX angle valve. It is the most reliable and durable option, offering superior performance compared to other options. They are easy to install, highly efficient, and provide excellent corrosion protection due to their stainless steel construction. Additionally, they are made of high-grade brass that resists rusting over time and ensures a longer lifespan than other materials. Plus, they come in various sizes and styles, so there is something to fit any need or aesthetic preference.

PEX angle valves provide superior reliability through superior pressure ratings and temperature controls. This feature ensures that your plumbing system will remain safe from potential damages caused by higher water pressure or extreme temperature fluctuations.

Angel valve Inspection Methods.

 

For different types of valves, further tests can be performed. Let’s look at the associated valves tested via the procedure.

 

  • For pressure relief valves, we perform a valve seat leakage test. It works by targeting the valve seat to notice leakages.

 

  • Valves having backseat elements undergo backseat inspection. Gate valves and globes valves generally fall under this category.

 

  • A shell leakage inspection is done for shut-off valves and those wholly open or close. Check valves, isolation valves, and stop valves are applied to this testing.

 

  • A closure inspection can be made to check the valves’ closing mechanism. We can do it for almost all types of valves. Yet, gate valves, globe valves, plug valves, check valves, and ball valves agreed to this testing.

    Materials of Valve Parts from Plumberstar

    No. Part Materials
    1 Body Brass with Chrome
    2 Cartridge Brass
    3 Stem Brass
    4 Seal EPDM/cartridge
    5 Seal Gasket NBR
    6 O ring NBR
    7 Thread BSP,G 1/2″x2″
    8 Handle Wheel Steel
    9 Finish Sandblasted

 

Angle Valve Inspection Procedure.

 

Angel valve inspection can be carried out in a few easy steps. For hydrostatic angle valves, the following procedure is the simplest one.

 

  • Start by filling the body of the valve with a testing fluid. It gets served at an optimal fixed temperature.

 

  • Pressure is applied to the fill valve for about a minute (or more).

 

  • The pressure will cause the water to come out of leakages.

 

  • Physical instruments are used to measure the location where leakages occurred. Either on the stem, seat, or gasket.

The final testing gives an exact estimate to determine the damages in valves.

Final Remarks on Inspection Of Angle Valves:

 

Angle valve inspection is a necessary function to perform. Their maintenance is highly crucial. If you compromise on quality and working, you will have to keep changing valves to lose their working ability. It would help if you kept checking your valves for better performance and a long working time.

The best way is by inspection of valves. You can do it in a few steps. A little more consciousness can help your products last long. You can inspect the entire valve at once. By adding instruction liquid, it gets easier. Also, you can perform different types of tests for each category of angle valve type. There are a lot of options.

Inspecting each component of the angle is even a great idea. It can tell you about the exact location of the malfunction. You can only replace that part and save the rest.

This article is aimed to teach you about angle valve inspection. Reading and understanding it will make you quickly inspect angle valves at your home.

 

Read on Plumberstar:

Angle Valves Tutorial– All You Need To Know

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC, and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting,adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Plumberstar valve is mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

At Plumberstar, we boast 15 years of expertise in water and gas projects, and long-term partnerships with top global clients.

We offer competitive pricing and tailored solutions, thanks to our high order volumes and provide flexible solution

Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Plumberstar Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing
stainless steel insert and adapter and copper rings. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of Lead-Free DZR brass for a durable fitting that is also corrosion resistant
quality and performance is field-proven with more than 350 customers.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. Custom-Made and samples are free.

MOQ and Delivery – Lower MOQ even reach 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production, OEM, and ODM both available.

Non Disclosure Agreement – Plumberstar will not provide the same valves and manifold to your competitors. and help you to get more market shares, then we can sign an exclusive agreement

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order, free replacement if any is damaged, updated hot-sales items recommendations

Radiator works with a man

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchasing with competitive cost of valves and sanitary ware items. You get better prices for winning more in markets

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

There are many reasons to choose brass valves over other types of valves. Brass is a highly durable material that can withstand high temperatures and pressure. It is also resistant to corrosion, making it an ideal choice for use in wet environments. Brass valves are also easy to clean and maintain, which is an important consideration for busy households. Plumberstar brass valves are some of the most reliable and durable on the market. Plumberstar valves are easy to install and come with clear instructions.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?