Electric Motorized Ball Valve

Parameters of Electric Motorized Ball Valve

It is suitable for HVAC and status control of the water system. The valve body is adopting the ISO228 standard platform, the actuator’s using a synchronous machine that drives the gears steady.

Additional information

Materials:

CW617N, H58-3

Finising:

Sand blasted

Size:

1-1/2", 1-1/4', 1", 1/2", 2", 3/4"

Thread connection

BSP, BSPT, NPT

MOQ:

500pcs

Action time

15s

Drive Power

220VAC, 24V DC, 24VAC

Medium temperature

2 ℃ -95 ℃

Lead time:

30 days

Warranty:

12 months

Details about Electric Motorized Ball Valve

Electric Ball Valve

JX-0302

  • Drive power: 220VAC, 50-60HZ (can be customized 24V AC), DC24V
  • Power: 6 W
  • Action time: 15 S
  • Lead length: 50 cm (can be customized)
  • Medium: cold/hot water
  • Medium temperature: 2 ℃ -95 ℃
  • Control: three-wire two control (can be customized three-line control)
  • It is suitable for HVAC and status control of the water system. The valve body adopts the ISO228 standard platform, and the actuator uses a synchronous machine that drives the gears steadily. The new product is to meet customers’ requirements with compact size, ample torque, simple operation, free maintenance, and convenient installation under different working conditions. In addition, the actuator is equipped with a manual handle to open or close the valve in case of a power cut or other emergency.
  • DC 24V    
    With an electric auxiliary switching valve function
    Power consumption; 6W, running time; 5-15 seconds
    Maximum differential pressure: 1.0Mpa
    Low noise, operation noise less than 40DB;
    The ball valve and the actuator are threaded following the way, quick disassembly.
    Suitable for water or ethylene glycol with a concentration of less than 60%
    Fluid temperature 2-94 °C degrees, storage temperature -20-65 °C.
    Working pressure PN 1.6Mpa
    The valve body is brass
    Three lines, two control
    High temperature resistant

One particular star in this realm is the Electric Ball Valve. As the name suggests, it’s not just your average ball valve; it’s powered by electricity. But what exactly does that mean? Let’s get into the specifics.

Introduction to Electric Ball Valves:

An electric ball valve is a ball valve controlled by an electric actuator. The actuator will rotate the ball, typically 90 degrees, to open or close the valve. This is in contrast to manual ball valves, which require someone to turn the valve physically, or pneumatic ball valves, which use air to actuate the valve.

0302 e
3-way motorized ball valve

Sizes of Electric Ball Valves:

Electric ball valves come in various sizes, depending on their intended application:

  1. Micro-sized Valves: These are often 1/8″ to 1/4″. They’re perfect for small-scale operations, often found in labs or intricate machinery.
  2. Small to Medium-sized Valves: Ranging from 1/2″ to 2″, these are commonly used in residential plumbing, smaller industrial applications, and HVAC systems.
  3. Large-sized Valves: 3″ to 8″ and above. These valves are deployed in large-scale industrial processes, municipal water systems, and in sectors like petrochemicals.

Key Specifications:

  1. Material: The valve’s construction material dictates its strength, longevity, and compatibility. Common materials include:
    • Brass: Suitable for non-corrosive mediums.
    • Stainless Steel: Apt for corrosive environments and offers enhanced durability.
    • PVC: Great for water systems and some chemical processes due to its corrosion resistance.
  2. Voltage Requirements: Ensure the electric actuator’s voltage aligns with your supply voltage. Common voltages include 12V, 24V, 110V, or 220V.
  3. Torque: Measured in Newton meters (Nm) or foot-pounds (ft-lb), it indicates the force exerted by the actuator to rotate the valve. A larger valve or one expecting more resistance (due to high flow rates or viscous mediums) will require a higher torque.
  4. Temperature Range: Electric ball valves can operate within specific temperature ranges depending on the material and design. For instance:
    • Brass: -20°C to +200°C
    • Stainless Steel: -270°C to +400°C
    • PVC: 0°C to +60°C
  5. Pressure Rating: Dictates the maximum pressure the valve can handle without compromising integrity. Common ratings are often in PSI (Pounds per Square Inch) or Bar. For example:
    • Brass: Up to 600 PSI
    • Stainless Steel: Up to 1000 PSI
    • PVC: Up to 150 PSI
  6. Actuation Speed: How quickly the valve can transition from the open to the closed position, often measured in seconds.
  7. Connection Type: Refers to how the valve attaches to the piping. Common types include threaded (NPT or BSP), flanged, or push-fit.
  8. Seal Material: Ensures the valve is leak-proof. Common materials include PTFE (Teflon), EPDM rubber, or Viton, each having specific temperature and chemical compatibility ranges.

Understanding sizes and specifications is critical when choosing an electric ball valve. The right choice will ensure efficient operation, a longer lifespan, and fewer maintenance issues. Always refer to manufacturer datasheets and consult with experts if unsure of your specific needs.

Raw Materials in Electric Ball Valves:

The bedrock of any device’s performance, durability, and safety is fundamentally rooted in its raw materials. Electric ball valves, integral components in many fluid flow systems, are no different. Understanding the materials that form these valves gives one a clearer insight into their capabilities and ideal applications. Here’s an original overview of the primary raw materials used in electric ball valves:

1. Brass:

  • Source: An alloy of copper and zinc, brass’s golden hue isn’t its only advantage.
  • Properties: Exhibits excellent machinability, making it a favorite for manufacturing. With good corrosion resistance, especially against water, it’s a common material for plumbing applications.
  • Limitations: Not suitable for highly corrosive environments or high-temperature applications.

2. Stainless Steel:

  • Source: Primarily composed of iron, chromium, nickel, and carbon inclusions.
  • Properties: Highly corrosion-resistant, especially the 316 variant, which includes molybdenum for enhanced resistance against chlorides. Offers strength and durability.
  • Limitations: Despite its robust nature, it can be more costly and unsuitable for specific chemicals.

3. PVC (Polyvinyl Chloride):

  • Source: A synthetic plastic polymer, white in its original state.
  • Properties: Lightweight, corrosion-resistant, and suitable for water and some chemical processes.
  • Limitations: Not ideal for high-temperature applications and can degrade when exposed to certain organic solvents.

4. Zinc:

  • Source: A naturally occurring metal, often alloyed with other materials to improve their properties.
  • Properties: When alloyed with copper to produce brass, it strengthens and maintains flexibility. Sometimes used as a coating (galvanization) for steel to provide corrosion resistance.
  • Limitations: Pure zinc isn’t typically used for valve bodies as it can corrode in specific environments.

5. Aluminum:

  • Source: A silver-white, lightweight metal abundant in the earth’s crust.
  • Properties: Lightweight, corrosion-resistant, and possesses good thermal and electrical conductivity.
  • Limitations: While it’s resistant to rust, it can corrode in highly alkaline or acidic environments.

6. Seals and Gaskets:

Materials like PTFE (Teflon), EPDM rubber, and Viton are often used to ensure leak-proof valves. Their selection depends on the valve’s intended application and the medium it will regulate.

The raw materials utilized in electric ball valves significantly dictate their functionality and longevity. Users can ensure optimal performance in specific environments by choosing a valve made from suitable materials, reducing wear, maintenance, and potential downtime. Always research and, if needed, consult experts before making material-based decisions.

motorized electric ball valve
motorized electric ball valve

OPERATING PRINCIPLE OF MOTORIZED BALL VALVE

This type of electric ball valve operation is not so complicated. The primary function is to rotate the ball valves by torque. The electric motor of the valve produces torque. This torque is then transferred by a shaft connected to the valve stem. It makes the ball valve rotate. In this case, a precise & enough torque must be generated. Having a gearing system is good for the proper torque. This gearing system connects with the electric motor shaft.

Another vital thing is torque capacity. It’s an essential specification for choosing an actuator. Torque capacity must be greater than the required torque, and it’s a breakaway one. The breakaway torque is the least. Turning the ball valve into a full close or a fully open state is necessary. It will help to turn the ball valve by a certain percentage. Valve manufacturers make it specific all the time.

The whole operation depends on the response time of an actuator. From the technical point of view, you can call the speed of the process response time. The response time or operation time of an electric actuator is inversely proportional to the torque of the actuator. The gear system describes the relationship between speed and torque, and A higher gear ratio makes more torque. More torque makes a lower response time.

Actuators are comfortable with 12V, 24V, and 48V direct currents. If alternating current, the voltage value will be 24V, 48V, 120V, 130V, and 240V. You can use a limit switch to control the wind. It will stop the current when the valve is fully closed or open. Sometimes, there needs to be a modulating control. Motors can carry out the power of modulation. This can fix the position of the valve. Modulation control makes the situation easier at any point between opening and closing. It means the work is between 0° and 90°. This is useful for a valve. It can regulate the flow rate through the valve. You can also use a positioning circuit board in the actuator. It helps to modulate the electric motor.

MOTORIZED BALL VALVES FOR HVAC APPLICATIONS

Two distinct types of rotary actuators are available for HVAC application. Among them, one is the basic start/stop unit. This unit defines that the valve is either in a fully open or a whole closed state. Another type of actuator makes position between 0 and 90° using a control signal. And it’s because of modulating control. Which operation is slower. It makes perfect flow control for HVAC applications. The flow optimizer makes the flow rate increase. It works in direct proportion to the rotation of the ball.

Monitoring the percentage of flow is essential. The rate of flow changes with the optimizer disc variation as the ball rotates. A valve without the optimizer causes a sudden increase in the flow. This precise control is helpful for applications like mixing water on heat exchangers.

Replacing the actuator is very crucial for HVAC applications. First, ensure the actuator drive tab and the valve stem slot are in the same orientation. If not, you should rotate the valve stem with a screwdriver to align it. After that, press the actuator onto the valve stem. Then, swap the locking pin on either side.

 

ADVANTAGES OF USING MOTORIZED BALL VALVE

  • Low resistance with the medium
  • Easy for installation and transport because of lightweight and small-volume components
  • Environmentally friendly and non-toxic. So that pure water and drinking water flow system is convenient.
  • Greater flow capacity
  • Reasonable price
  • Sustainable service life.
  • Greater Cv (molar heat capacity at constant volume) value than solenoid valves
  • Automated systems
  • Operating cost is less than solenoid valves
  • Anti-water hammer
  • Automated systems
  • Operating cost is less than solenoid valves
  • Anti-water hammer

How to Install and Repair an Electric Ball Valve: A Comprehensive Guide

Electric ball valves are integral to various systems, from home automation to large industrial processes. Proper installation is paramount to ensure optimal performance, and knowing how to repair one can save costs. Here’s a comprehensive guide:

Installation of Electric Ball Valve:

1. Pre-Installation:

  • Safety First: Always turn off the electricity and shut off the main water or gas supply.
  • Inspect the Valve: Inspect the valve for any visible damage or defects before installation.
  • Gather Necessary Tools: Wrenches, Teflon tape, electrical wire, wire stripper, and screwdrivers are typically required.

2. Positioning:

  • Determine the flow direction. Most valves will have an arrow indicating the flow direction.
  • Ensure the area is clean from debris which could damage the valve.

3. Plumbing Connection:

  • Use Teflon tape on threaded connections to ensure a leak-free joint.
  • Align the valve with the pipe ends and tighten using a wrench. Avoid over-tightening, which could damage the threads.

4. Electrical Connection:

  • Expose the electrical terminals by removing the protective cover.
  • Connect the wires using the valve’s manual or labeling as a guide. Typically, there’s a standard wire, a wire to open the valve, and another to close it.
  • Secure connections with wire nuts and ensure no exposed wires are visible.
  • Replace the protective cover.

5. Testing:

  • Turn on the water or gas supply slowly and check for leaks around the valve connections.
  • Energize the valve, ensuring it opens and closes as expected.
electrical ball valve
electrical ball valve

Repair of Electric Ball Valve:

1. Diagnosis:

  • Identify the issue: Is it a mechanical fault with the valve not opening/closing or an electrical issue with the actuator?
  • Listen for any unusual sounds when the valve operates.

2. Mechanical Issues:

  • Leakage: Often due to worn seals. Turn off the supply, disassemble the valve, and replace the seals or gaskets.
  • Stiff Movement: This can be due to debris buildup or corrosion. Clean the valve, removing any obstructions.

3. Electrical Issues:

  • Actuator Not Working: Use a multimeter to check if power reaches the actuator. If not, the issue might be with the wiring or power source.
  • Incomplete Operation: This might be due to a misalignment of gears inside the actuator. Open the actuator housing and inspect for any visible damage. Realign or replace components as necessary.

4. Replacement:

  • If repairs are extensive or the valve is old, replacing the entire unit might be more cost-effective.
  • To replace, turn off the supply, remove the old valve, and install a new one following the above installation steps.

Conclusion:

Regular maintenance, such as cleaning and periodically testing the electric ball valve’s operation, can prolong its life and reduce the need for repairs. Always refer to the manufacturer’s manual specific to your valve model for any nuances in installation or repair procedures.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?