Radiant Floor Manifold

Parameters of Radiant Floor Manifold

The Manifold connects the heat source – a boiler, heat pump, or other – with the water underfloor heating circuits, regulates the incoming water temperature via the Mixing Unit and distributes this warm water throughout the floor circuits for an energy-efficient heating system.

Additional information

Materials:

Stainless steel

Size:

1"

Temperature:

-20˚C-110˚C

Thread connection

BSP, NPT

Working pressure

16 bar

Loops:

2-12

MOQ:

100pcs

Warranty:

12 months

Details about Radiant Floor Manifold

Radiant Floor Manifold

JX-0704

Radiant Floor Manifold

  • Stainless steel Manifold
  • This radiant floor heating system includes body flow meters with adjustable flow rates and an isolation ball valve with 1″ NPT thread made of high-quality brass forging.
  • This PEX Manifold set is pressure tested and pre-assembled. Simply mount the Manifold on brackets and connect the valves and PEX tubing.
  • PEX Manifold adapters with the Manifold are compatible with any PEX tubing – but we have no adapters, Compression type connections & push fittings for ease of installation
  • There is an automatic float-type air vent for air elimination purposes. It also includes a cap for pressure testing purposes.
  • Manufactured from corrosion-resistant and durable Stainless Steel to last for life
  • Compatible with any PEX tubing – no special adapters needed
  • Simply mount the Manifold on brackets and connect the valves and PEX tubing
  • The Manifold connects the heat source – a boiler, heat pump, or other – with the water underfloor heating circuits, regulates the incoming water temperature via the Mixing Unit, and distributes this warm water throughout the floor circuits, an energy-efficient heating system.
  • Manifolds are used in all underfloor heating systems above 25m2, irrespective of floor type. Manifolds are supplied complete and fixed with a wall mounting bracket. The Manifold comes complete with a drain and air vent assembly positioned on either end of the Manifold. The isolation valves are supplied separately for the supply end of the Manifold.

Manifold

Manifold

1″

Manifold center distance

50mm

Manifold Materials

Stainless steel 304

Manifold Port

2-12 loops

Working Temperature:

From 5 ℃ To +110 ℃

Accessories;

Flowmeter,Adapter, Air vent, Pump, Gauge, and Clamp

Applications

Heating system, underfloor heating, TRV

Thread connection:

ISO228,BS2779,DIN 259, ASME B1.20.-1983 Pipe Thread

Quality/valve Certifications

CE,ISO9001,ACS

Finish;

Original

Cartridge

Brass cartridge

Adapter

3/4″x20; 3/4″x16

Nickname

Manifold valve

Other parts

Ball valve with pressure gauge

Handle

Wheel handle
  • Heating Manifold Components & Parts:
    • Flow Gauge: The flow gauge indicates the flow rate through each floor circuit for the zone.
    • Flow Temperature Gauge: The warm water flows toward the flow manifold. The temperature is then shown on the flow temperature gauge.
    • Flow Change: The flow change valve allows users to adjust the rate of flow.
    • Pressure Gauge: The pressure gauge plays a good role in the flow return manifold rail. It helps measure pressure during the pressure test.
    • Filling/Drain off Valve: The filling and drain valve is for the initial fill. It is also used for draining the heating system.
    • Air Vent: It is on the Manifold’s ‘flow’ and ‘return’ arms to remove air from the heating system.
    • Actuators: One can install Actuators in conjunction with heating manifold stations. The actuator makes it possible to control individual zones with a room thermometer. Actuators are from a small alternating current heated motor. The unit screws onto a manifold valve. One can buy an Actuator with switches. Actuators without switches are also available. When the thermostat shows the temperature, the actuator opens a valve. This process takes up to almost five minutes to complete. You can zone off a building by installing actuators. It lets every connection create its zone. However, this procedure might raise the cost of a heating system high.
    • Manifold Mixing Unit: Mixing Unit unites water coming from the heating source. The main purpose is to maintain a unified temperature for the system. The Mixing Unit permits the temperature to rise to 60 degrees Celsius. And the lowest range is up to 20 degrees. The Mixing Unit consists of 3 parts: lower Arm, Upper Arm, and Circulator.
    • Return Temperature Gauge: This analyses the difference between flow and return water temperature.
    • Isolation and Commissioning Valves: These are the vital parts of Heating Manifold arms. Sometimes the Isolation Valvesallow the Manifold for isolation. You can control water flow by the Commissioning Valves. It permits the system to get full or drained and pressure tested.
    • Wiring Centre: The heating system follows Electricity. The Wiring Centre of the Manifold controls the Electricity. It creates a connection among all the components of the Manifold.
    • Setpoint Controls: Setpoint controls protect concrete from cracking. If the heating system becomes overheated, the water temperature rises as well. The room thermostat is not capable of sensing this temperature. That’s why it can’t switch off the heat source. As a result, concrete might get broken, which has occurred many times. Setpoint control is the one that prevents this from happening.
    • Electronic reset controls: The alternative to setpoint control is an electronic reset control. This control maintains the temperature of the supply water. When one wants to reduce up-down temperatures, reset controls work very well. For a direct piping system, the heat source should have three features. Firstly a source that accepts low temperature returns to water. Secondly, a source that has continuous circulation. And finally, a source that has either a setpoint control or a reset control.

 

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?